|Department of Engineering|
|University of Cambridge > Engineering Department > Machine Intelligence Lab|
3D ULTRASONIC STRAIN IMAGING USING FREEHAND SCANNING AND A MECHANICALLY-SWEPT PROBE
R.J. Housden, A.H. Gee, G.M. Treece and R.W. Prager
This paper compares two approaches to 3D ultrasonic axial strain imaging. The first uses a tracked ultrasound probe swept manually over the region of interest to build up a co-registered sequence of 2D strain images, each obtained by comparing neighbouring B-scans in the sequence. The alternative uses a mechanically-swept 3D probe to record pre- and post-deformation volumes, which are then processed to yield a volume of strain data. The resulting strain images depend on the stress fields induced by the different probe footprints and also on the signal processing techniques used to produce the strain volumes. Both of these factors are considered in this paper, which presents a comparison of the two approaches based on finite element simulations validated through in vitro experimentation. The conclusion is that, for a given frame density, high quality axial strain data is more easily obtained using the 3D probe. However, the freehand approach might be preferable in situations where limited access to the scanning target restricts the use of a large footprint probe.
[576 KBytes PDF, 18 pages]
If you have difficulty viewing files that end
which are gzip compressed, then you may be able to find
tools to uncompress them at the gzip
If you have difficulty viewing files that are in PostScript, (ending
'.ps.gz'), then you may be able to
find tools to view them at
We have attempted to provide automatically generated PDF copies of documents for which only PostScript versions have previously been available. These are clearly marked in the database - due to the nature of the automatic conversion process, they are likely to be badly aliased when viewed at default resolution on screen by acroread.
|| Search | CUED | Cambridge University ||
2005 Cambridge University Engineering Dept
Information provided by milab-maintainer